FORUM MODELARZY KARTONOWYCH   
Regulamin i rejestracja regulamin forum  jak wstawiac grafike, linki itp do wiadomosci grafika i linki w postach

FORUM GŁÓWNE
Modele kartonowe, ich budowa, technika, problemy, recenzje, nowości oraz wszystkie tematy związane z Naszym Hobby :-)


Projekt Grupowy:  50 lat Małego Modelarza  
Na tapecie:  Akcja sprzątania forum. W czynie społecznym, bez nagród i medali :>  
Na tapecie:  Projekt 50 lat Małego Modelarza - apel o uzupełnienie brakujących zdjęć.  


 Działy  |  Tematy/Start  |  Nowy temat  |  Przejdź do wątku  |  Szukaj  |  Widok rozszerzony (50 postów/stronę)  |  Zaloguj się   Nowszy wątek  |  Starszy wątek 
 Strona 4 z 5Strony:  <=  <-  1  2  3  4  5  -> 
14-06-17 09:28  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Dread   

Yes , I'm Igor Kuniewskij surely. Alabama had been designed from BS - Profile Morskie. #018. Thick outlines were painted for demanding of publisher - Orel. About your question of spare color sheets - I will try question it as possible.

--
2 be or not 2 be

 
14-06-17 09:37  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Sven 

Na Forum:
Relacje w toku - 8
Relacje z galerią - 2
Galerie - 6


 - 3

Yes, please: you can see how the side sheets are located on USS Alabama as musem ship in Mobile, Alabama state: there're needed just few long strips.

https://www.flickr.com/search/?text=USS%20Alabama%20bb-60

https://www.ussalabama.com/

Below you can see my suggestions how to adopt the side strips on Alabama model, strips with inside dark blue thin lines, hiding white ones on model:



--

Post zmieniony (14-06-17 09:53)

 
14-06-17 10:14  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Dread   

Here it is :

http://my-files.ru/a7f2f3
http://my-files.ru/0enfj5
http://my-files.ru/lybor6
http://my-files.ru/jqct21
http://my-files.ru/2t09ro

To load file press big green button in up side of screen.

 
14-06-17 10:18  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Sven 

Na Forum:
Relacje w toku - 8
Relacje z galerią - 2
Galerie - 6


 - 3

Thank you very much, that's great!

PS: for your future projects you could consider to rework of the Alabama to improved one as USS Massachusetts (BB-59), advantage is that warship is also existing today as museum ship ;)

--

Post zmieniony (14-06-17 11:24)

 
14-06-17 13:07  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Dread   

Orel prefer exclusive projects , so it"s improbably.

--
2 be or not 2 be

 
20-12-17 13:18  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Dread   

Look at this :
http://www.papermodeling.net/forum/viewtopic.php?f=23&t=372

--
2 be or not 2 be

 
20-12-17 13:58  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Sven 

Na Forum:
Relacje w toku - 8
Relacje z galerią - 2
Galerie - 6


 - 3

Yes, I see, the hull base-frame skeleton was made directly from the model set, while I've made of this from laser cut set, that's why it was over 1 cm longer vs the main deck plates. So, I'm very interesting how it will be completed in particular in the side main belt recess area as well as with large bottom plates parts. Anyway I'm going to start soon with bottom hull finishing, it'll be interesting to compare. Thanks.

--
Sven

HMS Ark Royal

 
20-12-17 15:02  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Dread   

All parts G1...G6 must be glued overlaped by 10 mm , because I wrote about i\this in instruction. He cut 10 mm from this part and glued it in joint.

--
2 be or not 2 be

 
20-12-17 15:31  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
orkan   

,, Na naszym forum piszemy w sposób czytelny dla innych, stosując się do zasad gramatyki i ortografii języka polskiego." - fragment p.5 regulaminu forum.

 
20-12-17 16:29  Odp: [N] USS Alabama (BB-60), 1: 200, Бумажное моделирование
Sven 

Na Forum:
Relacje w toku - 8
Relacje z galerią - 2
Galerie - 6


 - 3

But the problem was that also the main vertical skeleton part V1 of the bow as well as horizontal main parts G3 a and G3B was too long so I had to short cut: almost 2 cm, not 1 cm as it's on the4 overlapping lines. Maybe on laset cut skeleton it was not so clear and in instruction sentence to put the near elements to overlap for the cutted line. Finally I had to cut to fit the lenght to the main deck and after its cutting the curve of G3a and G3B had the misalignment. This solution to fit skeleton main parts, horizontal and vertical to overlap by 1 cm is very strainge and really not needed, so it could lead to the mistake. Anyway I was able to resolve of this problem and I can say that now I forgot about that, behind of me there're another adventures as I wrote previously.

Napisałem, że w tej relacji na sąsiednim forum Kolega skleja szkielet bezpośrednio z wycinanki, a ja skleiłem laserowy, który był ponad 1 cm dłuższy od pokładu: dokładnie dłuższy prawie 2 cm. Nie wiem czy tłumaczyć to można koniecznością sklejania poprzecznic i wzdłużnic na zakładkę do linii przerywanej co może tłumaczyć 1 cm, ale nie 2 cm, Dziwne rozwiązanie klejenia szkieletu. W każdym bądź razie nie jest to największy problem, ale to choćby jak okleić prawidłowo uskok nad pancerzem burtowym i wielkie oklejki dna.

--
Sven

HMS Ark Royal

 Tematy/Start  |  Wyświetlaj drzewo   Nowszy wątek  |  Starszy wątek 
 Strona 4 z 5Strony:  <=  <-  1  2  3  4  5  -> 

 Działy  |  Chcesz sie zalogowac? Zarejestruj się 
 Logowanie
Wpisz Login:
Wpisz Hasło:
Pamiętaj:
   
 Zapomniałeś swoje hasło?
Wpisz swój adres e-mail lub login, a nowe hasło zostanie wysłane na adres e-mail zapisany w Twoim profilu.


© konradus 2001-2024